Resources

Installing Screw-On Panels

Installing Mortar-On Stone

FAQ & Warranty

How do I clean my stone?

Although stone is solid and durable, it's recommended to use a light touch while cleaning.  Spray with a garden hose to clean.  If needed, use a solution of mild detergent and water and lightly scrub stone surface with a soft bristle brush.  Rinse throughly to remove any cleaning solution.  Do not use wire brushes, acids, vinegar or pressure washers.

Why does my stone appear darker than the sample?

We produce durable concrete products, which require a curing process.  You may notice stones having a darker appearance than a sample.  The packaged stone has moisture and needs to aerate in the sunlight for about 7 days.  Rainy, cloudy or high-humidity climates may require more time.

As the moisture in the stone equalizes, the overall color will lighten.  Dark colors-grey, deep brown, and black-display the most drastic color changes as they normalize and cure.

Most installations require multiple boxes of products, which may be at varied stages of curing.  It is common for the same stone and color palette to display a range of shades.  In this way, manufactured stone exhibits the natural and diverse tints found in natural stone.

Can Stack-A-Stone be used around wood burning or gas fireplaces?

Yes.  Stack-A-Stone can be used around interior and exterior fireplaces and wood burning stones since it is made from concrete.  Caution:  Stack-A-Stone products should not come in direct contact with fire or flame.

How are Stack-A-Stone products sold?

Flat pieces and screw-on panels are sold by the square foot, while corner pieces are sold by the linear foot.  Hearthstones and accessories are sold individually.

What materials are used in Stack-A-Stone products?

Stack-A-Stone products are crafted using hand-selected natural stone, which is cast in molds to capture all of the beautiful textures.  Each product is made with cement, aggregates and iron oxide pigments, resulting in manufactured stone that closely resemble its natural counterparts.

Do Stack-A-Stone products have color throughout?

Yes, the color is blended throughout the entire product during the casting process.  Color overtones are applied and integrated into the product to ensure consistency.

Do your stone colors appear nature inspired?

Yes, through years of experience and artistic excellence, Stack-A-Stone uses state-of-the-art manufacturing processes to create textured, beautiful stones hand colored to capture uniquness as seen in nature.  Every Stack-A-Stone profile is cast from natural stone molds and are colored by hand during the production, ensuring no two stones look alike.  The process is labor intenstive but the results are worth it.  As with any artisanal product, their will be variance from piece-to-piece.

Do samples represent exact color ratios?

No, we show all the colors represented in the color palette.  Due to the smaller size of the samples, we can't completely show accurate color ratios.  The handmade process of coloring each stone creates slight variations in colors, similar to those found in nature.

Can I install Stack-A-Stone products near water?

It is not advisable to install Stack-A-Stone products below a water line.  Like any lightweight concrete product, exposure to chemicals such as chlorine can lead to discoloration and fading over time.  Stack-A-Stone strongly advises against using stone veneer in areas with cascading water, such as swimming pools or water fountains, even if a sealer has been applied.  The constant flow of water can accelerate wear and tear on stone veneer, and such installations are not covered under Stack-A-Stone's warranty.

30 Year Non Pro-rated Limited Product Warranty

This warranty ensures that manufacturing defects within 30 years of your purchase date are promptly addressed by Stack-A-Stone.  This warranty specifically covers any materials manufactured by Stack-A-Stone that are found to be defective.  Certain circumstances are not covered under this warranty, including improper installation, damage from foundation or substrate movement, all natural disasters such as earthquakes or fires, and discoloration from exposoure to chemicals, weather, pressure washers, or other causes beyond the manufacturers control.  Labor costs are not included.  These products are not intended for use on surfaces with foot or vehicle traffice or those in constant contact with the ground.

Stack-A-Stone Product Certification